FETtec AIO 35A - N

  • What does "N" version mean?

    This product has no onboard analog OSD.

    Use of digital OSDs is still possible as usual.

    Comparison:

    Features:

    FC:

    • Latest STM32G4 Processor

      • 170Mhz + Math accelerator

      • MPU6000

    • Supply voltage 12-25V (3S-6S Lipo voltage)

    • 2x dedicated onboard 5V BEC for VTX (max. 600mA each)

      • 5V BEC for RX

      • 5V/16V BEC for VTX (switchable and real Pit*)

    • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

      • VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

    • 2x 4 pin connector for receiver and VTX

      • Signal, telemetry, 5V, gnd

      • Gnd, 5V, TX1, RX1

    • 5 UART serials

      • UART 1 free

      • UART 2 used for Receiver

      • UART 3 free

      • UART 4 free

      • UART 5 used for ESCs / TLM / Onewire

    • Solder pad for RGB LEDs

    • Supported ESC protocols

      • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

    • KISS FC firmware

     

    *real Pit-Mode: A power supply pin which is remotely switchable

     

    ESC:

    • Active current limiting @ 35A

    • Input voltage: 3s-6s

    • High quality 40V MOSFETs

    • STM32G071 @ 64MHz

    • up to 128 kHz Motor PWM

    • Full sine wave control
    • Automatic input signal detection

      • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

    • FETtec ESC firmware

     Connector type: JST-SH-1mm 

     

    Dimensions:

     

     dimensionspsqi5eNBtK81J

     

    • Maximum outside dimensions: 30 x 37,5mm

      • Mounting hole arrangement: 20 x 20mm with M2 mounting hole (expandable to M3)

    • Overall height: 7,9mm

    • Weight: 8,9 g

     

    Software:


    KISS Firmware - Softwareupdate via FETtec Configurator

    FETtec ESCs Firmware - Softwareupdate via FETtec Configurator

     

    Scope of delivery: 

    1x FETtec AIO 35A lite

    1x Capacitor 50V 470µF

    2x 4 pin cable with JST connector on one side

    1x 8 pin cable with JST connector on one side

    Standoffs

    Related links to "FETtec AIO 35A - N"
    Available downloads:

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)