FETtec FC G4 - N

Grab a FETtec ESC here!

Product information "FETtec FC G4 - N"

What does "N" version mean?

This product has no onboard analog OSD.

Use of digital OSDs is still possible as usual.

Comparison:

G4-N-OSD-Comparison-NEW

 

Features:

  • Features:

    • Latest STM32G4 Processor

      • 180Mhz + Math accelerator
      • Gyro IIM-42652 SPI
    • Supply voltage 6-27V (2S-6S Lipo)

    • 2x dedicated onboard BEC (2A each)

      • 5V BEC for RX
      • 5V/16V BEC for VTX (switchable and real Pit*)
    • Improved IO protection

      • All IOs of the microcontroller e.g. in connectors or solder pads are protected against voltage or current spikes
    • 2x 8 pin connector for solder free ESC connection

      • Connector 1: ESC signal 1-4, telemetry, VCC, GND
      • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND
    • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

      • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

    • 2x 6 pin connectors for serials

      • RX1, TX1, 3.3V, VCC, 5V, GND
      • RX3, VCS/TX3, RGB LED, VCC, 5V, GND
    • 1x 4 pin connector for receiver

      • Signal, TLM, 5V, GND

    • 5 UART serials

      • UART 1 free
      • UART 2 used for Receiver
      • UART 3 free
      • UART 4 free
      • UART 5 used for ESCs / TLM / Onewire
    • 4 ESC solder pads (Signal/GND) in each corner

    • Buzzer pads

    • 4 tiny RGB LEDs (selectable color)

    • Supported ESC protocols

      • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

    • FETtec Alpha FC firmware (KISS FC firmware flashable)
    • Connector type: JST-SH-1mm


    *real Pit-Mode: A power supply pin which is remotely switchable


Dimensions:

dimensionsO2BNL0T723GCJ

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:

    • 20 x 20mm with M2 mounting hole (expandable to M3)

    • 30 x 30mm with M3 mounting hole

    • 30 x 30mm mounting hole tips are removable to reduce overall FC size

  • Overall height: 7,9mm

  • Weight: 5,37g

 

Firmware:

  • KISS Firmware


Scope of delivery:

  • 1x FETtec FC G4 N
  • 1x 8 pin cable (open on one side)
  • 1x 6 pin cable (open on one side)
  • 1x 4 pin calbe (open on one side)
Related links to "FETtec FC G4 - N"
Available downloads:



Features:

  • Latest STM32G4 Processor

    • 170Mhz + Math accelerator

    • MPU6000

  • Supply voltage 6-27V (2S-6S Lipo)

  • 2x dedicated onboard BEC (max. 600mA each)

    • 5V BEC for RX

    • 5V/16V BEC for VTX (switchable and real Pit*)

  • 2x 8 pin connector for solder free ESC connection

    • Connector 1: ESC signal 1-4, telemetry, VCC, GND

    • Connector 2: ESC signal 5-8 (depending on UAV type 1-4), telemetry, VCC, GND

  • 1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems

    • real Pit* VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3

  • 2x 6 pin connectors for serials

    • RX1, TX1, 3.3V, VCC, 5V, GND

    • RX3, VCS/TX3, RGB LED, VCC, 5V, GND

  • 1x 4 pin connector for receiver

    • Signal, TLM, 5V, GND

  • 5 UART serials

    • UART 1 free

    • UART 2 used for Receiver

    • UART 3 free

    • UART 4 used for onboard OSD, can be set free

    • UART 5 used for ESCs / TLM / Onewire

  • 4 ESC solder pads (Signal/GND) in each corner

  • Buzzer pads

  • 4 tiny RGB LEDs (selectable color)

  • Supported ESC protocols

    • PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire

  • FETtec KISS firmware

  • Onboard OSD

    • Graphic OSD (STM32)

    • Full KISS Tuning

      • Filter (PIDs, Rates, Settings)
      • LED control (RGB LED, Racewire)
      • VTX
      • Live data graphs (Voltage, motor rpm, current, motor temp, gyro values, link quality)
      • KISS GPS support + live map
      • Custom graphic pilot logo
      • Stick overlay
      • Custom layout
      • can be deactivated for usage of digital systems
  • Connector type: JST-SH-1mm


*real Pit-Mode: A power supply pin which is remotely switchable


Dimensions:

FETtec Kiss FC G4 Flight Controller Dimensions

  • Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm

  • Mounting hole arrangement:

    • 20 x 20mm with M2 mounting hole (expandable to M3)

    • 30 x 30mm with M3 mounting hole

    • 30 x 30mm mounting hole tips are removable to reduce overall FC size

  • Overall height: 7,9mm

  • Weight: 5,37g

 

Firmware:

  • KISS Firmware
  • FETtec OSD Firmware


Scope of delivery:

  • 1x FETtec FC G4
  • 1x 8 pin cable (open on one side)
  • 1x 6 pin cable (open on one side)
Related links to "FETtec FC G4"
Available downloads:

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)